騙人布


自動桌 併購 T-Splines

December 22, 2011 08:30 AM Eastern Time
Autodesk Acquires T-Splines Modeling Technology Assets

Transaction to Strengthen Free-form Surface Modeling Capabilities

SAN RAFAEL, Calif.--(BUSINESS WIRE)--Autodesk, Inc. (NASDAQ:ADSK) has acquired certain technology-related assets from T-Splines Inc., a privately-held surface modeling software company, based in Utah. Terms of the transaction were not disclosed.

“The technology acquisition will strengthen our Digital Prototyping portfolio with more flexible free-form modeling and will help achieve even closer integration between industrial design and engineering workflows,” said Buzz Kross, senior vice president, Manufacturing Industry at Autodesk. “T-Splines technology will benefit designers and engineers that require watertight surfaces for downstream analysis and manufacturing.”

Business Outlook

This transaction is expected to have no impact on guidance issued on November 15, 2011.

Safe Harbor Statement

This press release contains forward-looking statements that involve risks and uncertainties, including statements regarding: the impact of the acquisition on Autodesk's product and services offerings, the impact of the acquired technology on Autodesk's products and services capabilities, and the impact of the acquisition on end-user functionality and workflow integration. Factors that could cause actual results to differ materially include the following: difficulties encountered in integrating T-Splines’ technology; costs related to the acquisition; whether certain market segments grow as anticipated; the competitive environment in the software industry and competitive responses to the acquisition; our success developing new products or modify existing products and the degree to which these gain market acceptance; general market and business conditions; the timing and degree of expected investments in growth opportunities; pricing pressure; failure to achieve continued cost reductions and productivity increases; changes in the timing of product releases and retirements; failure of key new applications to achieve anticipated levels of customer acceptance; failure to achieve continued success in technology advancements; interruptions or terminations in the business of our consultants or third party developers; the expense and impact of legal or regulatory proceedings; and unanticipated impact of accounting for acquisitions.

Further information on potential factors that could affect the financial results of Autodesk are included in the company's annual report on Form 10-K for the year ended January 31, 2011, and Form 10-Q for the quarter ended October 31, 2011, which are on file with the Securities and Exchange Commission. Autodesk does not assume any obligation to update the forward-looking statements provided to reflect events that occur or circumstances that exist after the date on which they were made.

About Autodesk

Autodesk, Inc., is a leader in 3D design, engineering and entertainment software. Customers across the manufacturing, architecture, building, construction, and media and entertainment industries -- including the last 16 Academy Award winners for Best Visual Effects -- use Autodesk software to design, visualize and simulate their ideas. Since its introduction of AutoCAD software in 1982, Autodesk continues to develop the broadest portfolio of state-of-the-art software for global markets. For additional information about Autodesk, visit www.autodesk.com.

About T-Splines

For more information about T-Splines, visit www.tsplines.com.

Autodesk and AutoCAD are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. Academy Award is a registered trademark of the Academy of Motion Picture Arts and Sciences. All other brand names, product names or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document.

© 2011 Autodesk, Inc. All rights reserved.

Contacts

Autodesk, Inc.
Media Contact:
Jennifer Gentrup, 415-547-2435
jennifer.gentrup@autodesk.com
Investor Contact:
David Gennarelli, 415-507-6033
david.gennarelli@autodesk.com

單一曲面 練習

.
使用軟體: Rhino 4.0 sr9


.




.

Möbius Strip

.
使用工具: Rhino 4.0 sr9 + grasshpper

.


.

自製超滑順鼠貼

.

--------第一圖--------

刀片--隨便都可以,用來切斷雙面膠

雙面膠-- 3M兩倍黏雙面膠

鐵氟龍版材-- 台南 昌祐塑膠實業社 (29.5公分, 1mm厚,
長度可自選)


--------第二圖--------
將 雙面膠貼在 鐵氟龍版材 上面
聽聰敏兄 說 有分正反面, 這張其實是貼錯面的...

之後用一般的打孔機 加工即可...


--------第三圖--------
這是滑鼠的底部
如果髒的話 可以用去漬油清一下 會比較好貼...


--------第四圖--------
光學滑鼠,一般貼 3~4 張即可...

如果是傳統的滾輪滑鼠
要把原來的滑鼠的鼠貼挖起來
貼在原本滑鼠 鼠貼的位置 就不會過高...

完成...










.

練習-無參

.
使用工具 : Rhino4.0 + Grasshopper 0.8









.

練習-風扇剖面

.
使用工具 : Rhino4.0 + Grasshopper 0.8



.

練習- 雲造型燈罩

.
使用工具 : Rhino4.0 + T-Splines 3.0

第一圖 是原題目

第二圖 先用線段建出骨架

第二圖 稍微調整骨架的外型

第三圖 轉成ts曲面

第四圖 調整ts曲面的控制點

第五圖 切換為 smooth 模式...完成

第六圖 成品的另一個角度...























.

曲面連續性

.

圖一, 兩個曲面相交,沒有導角,是G0

圖二, RHINO的導圓角功能 產生的曲面 ,是G1

圖三, 也可以用移動控制點的方式 達成G1

圖四, RHINO的混接曲面(BlendSrf) 可以達到 G2

圖五, 用移動控制點的方式 達成G2

圖六, 也是用移動控制點的方式 達成G2

圖七, 是圖三 的控制點配置,紅色線段是輔助線

圖八, 是圖五 的控制點配置,紅色線段是輔助線

圖九, 是圖六 的控制點配置,紅色線段是輔助線





























.

voronoi 練習

.
使用工具 : Rhino4.0 + Grasshopper 0.8






.

T-Splines 練習25 - 人像-2

.
使用工具 : Rhino4.0 + T-Splines 3.0

.











































































.

T-Splines 練習25 - 結構

使用工具 : Rhino4.0 + GH + T-Splines 3.0










.

T-Splines 練習25 - 人像

.
使用工具 : Rhino4.0 + T-Splines 3.0

這是目前 進行的一個練習...



.

網子

使用工具 : Rhino4.0 + Grasshopper 0.8



.

手指-4

使用工具 : Rhino4.0 + Grasshopper 0.8 + T-Splines 3.0



.

TS 3.0 的新功能 - tsPipe

在 TS 2.0 要做到這樣 得花很多時間
TS 3.0 現在有新的指令 tsPipe 可以處理這樣類型的東西
雖然限制還滿多的, 但覺得還不錯....





.